Source coordinated basin and mixer packages for UAE hotel projects. Build one room-type record for the basin, cabinet or support, mixer, waste and installation interfaces, then connect the selected models to the project and import document requirements.
By Quality Sanitary Ware · Published · Updated
Record basin position, mounting, rim height and drainage with mixer reach, outlet height and handle clearance. Review the pair in a representative room layout. Save the approved drawings and finish samples under the room code before repeating quantities across the project.
This guide is for hospitality buyers, distributors and contractors sourcing bathroom packages from China. It covers purchasing coordination for guest bathrooms, public areas and service spaces. Official sources were checked on 2 November 2026. Requirements depend on the product, use and project jurisdiction; a Dubai reference is not a universal specification for every emirate.
Separate standard rooms, suites, accessible layouts and public facilities in the project schedule. Record basin dimensions, counter or cabinet width, mounting, waste access and the intended mixer arrangement for each type. The project designer should identify the required clearances and user needs. Issue the selected model and room drawings for installation review.
For a vanity with sink, list the cabinet, basin, countertop, mirror and plumbing fittings separately. A bathroom vanity unit may be offered in several layouts, but the selected drawing must identify the actual basin position and service openings. A pedestal basin has a different support and service arrangement and should have its own line rather than borrowing cabinet dimensions.
| Room task | Starting selection | Why it fits the buying task | Drawing and supply review |
|---|---|---|---|
| Standard room with a tap-hole basin | BV-04 / BV-P08-L and BF-14 / BF12 | Cabinet width options and a low-body basin mixer | Choose cabinet width; match tap hole, reach, waste and countertop scope |
| Vessel-basin feature room | Selected vessel basin and BF-19 / tz-114 | Raised-body mixer for a vessel pairing | Match rim height, reach and water landing position |
| Double-basin suite | BV-30 / MY023 with two BF-01 / A111 wall mixers as a proposal | Double washing positions with a coordinated wall-mixer layout | Approve basin spacing, wall outlet locations and access before selecting the complete package |
These are proposed room selections. Review the actual drawings and complete sample pairings before bulk approval.
| Purchasing point | Basin or cabinet information | Mixer information |
|---|---|---|
| Mounting | Countertop, wall, cabinet or pedestal arrangement | Deck or wall mounting and fixing positions |
| Working space | Bowl position, rim and surrounding clearance | Spout reach, outlet height and handle movement |
| Connections | Waste opening, overflow and access | Water connections and supplied installation kit |
| Appearance | Selected finish and approved sample | Finish sample and visible fitting alignment |
| Maintenance | Access behind or below the basin | Replaceable parts and access to connections |
Keep the wash basin mixer distinct from a sink mixer used in a kitchen or service area. Similar finish names do not establish interchangeable fittings. Ask for drawings covering the exact combination and keep the accepted revision with the room schedule. A sample-room review can reveal a poor pairing before quantities are finalized.
MoIAT's regulated-product conformity service covers products subject to technical regulations. The published requirements include a valid trade licence and a product test report from an accredited laboratory. Ask the UAE importing party to confirm applicability and the documents needed for each proposed item.
Assign a document-review line to the basin, tap, powered control and vanity. Record the model and configuration associated with each requested report or certificate. Match the requested report or certificate scope to the offered model.
DEWA's 2025 conservation handbook summarizes Dubai Building Code water-use limits for common fixtures. Use the responsible consultant's current project specification and required test conditions when requesting fittings. Do not treat a handbook summary as a nationwide approval or as evidence of a model's measured performance.
Put the requested flow performance and evaluation conditions in the RFQ. Ask the supplier to identify the exact outlet and control configuration being proposed. If a hotel changes a basin mixer or shower outlet during value engineering, send the alternative back for technical review. A change in appearance can also change interfaces and the documents needed by the buyer.
The MY023 / BV-30 double vanity provides an existing double-basin floating layout to discuss with the project team. Set the required cabinet width and basin spacing in the selected drawing, and identify the countertop, mirror and accessory scope in the quotation.
Browse basin mixers alongside bathroom vanities and our sink and wash basin hub. For pedestal or bidet designs outside the photographed range, send the brief through custom manufacturing. Keep existing catalogue models and made-to-order design requests distinct on the purchase schedule.
Agree sample approval points for finish, visible alignment, dimensions and the supplied component set. List the model reference on the sample record so a general colour name does not become the only identification method. Include any project-requested inspection and packing review in the scope sent for quotation.
For multi-room deliveries, identify the room-type package and carton contents. Keep replaceable fittings linked to the original reference and configuration. If goods are delivered in stages, provide the requested sequence and destination as project requirements. Discuss the commercial basis rather than assuming a standard lead time, minimum order or included freight service.
Send room quantities, model references, basin and mixer drawings, finish selections, component scope and the UAE destination. Attach the consultant's technical requirements and the importer's requested documents. Mark proposals and approved alternatives clearly. Use our UAE sourcing page, hotel supply solution and hotel procurement checklist to organize the request.
QSW can organise the coordinated model proposal, samples and requested technical files. The UAE importer handles the applicable conformity route, and the project consultant approves the installation and performance schedule.
Only where the mounting, reach, outlet height and working clearance suit each basin layout. Record the approved pairing for each room type.
No. Review the basin drawing, mounting, spout reach, outlet height, connections and supplied fittings as a coordinated selection.
Do not assume a shared route. The UAE importer should confirm which current requirements apply to each product and configuration.
No. Confirm the current project requirements and jurisdiction with the responsible consultant and importing party.
Send the models, quantities, selected configurations and destination with the technical or packing information your purchasing team needs.
